Epson MovieMate 30s - Manual (Page 27)

Using MovieMate With Other Equipment
27
Playing Audio From a Digital Audio Device
You can use MovieMate to provide speakers for a digital audio device, such as an iPod, MP3
player, portable CD player, or other device.
1. Make sure your audio equipment is turned off.
2. Connect an RCA stereo audio cable to your audio device and to MovieMate as shown
below.
3. Turn on the power switches on MovieMate and your audio equipment, and play your
music using the device controls.
4. You can adjust the volume input level by pressing and holding the button for
approximately 2 seconds. LEVEL 1 appears on MovieMate’s display window. Press and
hold the button again to select LEVEL 2 and increase the volume. You can also use any of
MovieMate’s other audio controls, as described on pages 42 through 43.
Main power switch
White
Red
RCA stereo
audio cable
iPod
Portable CD
player
MP3 player