Replacing the lamp – Epson MovieMate 30s User Manual
Page 49
Advertising
Caring for MovieMate
49
3. If you need to replace the filter, press up on the tab and lift off the cover.
4. Remove the old filter and install the new filter.
5. Replace the cover.
Replacing the Lamp
The life span of the lamp is about 3000 hours if the color mode is consistently set to
Theatre
Black
, and 2000 hours if any other color mode is used. (For instructions on changing the
color mode, see page 20.)
You can check how long the lamp has been used as described on page 45. If the number
shown is close to the limit, make sure you have a spare lamp handy.
Note: Turn off this product when not in use to prolong the life of the projector.
Advertising