Epson MovieMate 30s - Manual (Page 51)

Caring for MovieMate
51
5. Grasp the lamp as shown and pull it straight out.
Note: The lamp in this product contains mercury. Please consult your state and local
regulations regarding disposal or recycling. Do not put in the trash.
6. Gently insert the new lamp and tighten its screws.
Caution: Don’t touch the glass portion of the lamp with your bare hands; the invisible residue
left by the oil on your hands may shorten the lamp life. Use a cloth or gloves to handle the new
lamp assembly.
7. To replace the lamp cover, insert the tabs and then snap the cover into place. (MovieMate
won’t work if the lamp cover is loose.)
8. After replacing the lamp, you need to reset the lamp timer, as described in the next
section.