Changing language settings, Adjusting the resume and on-screen guide settings, 41 changing language settings – Epson MovieMate 30s User Manual
Page 41
Doing More with MovieMate
41
Changing Language Settings
You can use the
Language
Setup menu to change the default language for DVDs that allow
you to make this selection.
1. When a DVD is not playing, press the
button on the remote control. You see the
LANGUAGE
Setup menu:
2. Press
to highlight the setting you want, then press
to display a list of languages.
3. Press
to select the language you want, then press
to save it. For a list of language
code definitions, see page 67.
4. To return to the previous menu level, press
.
Adjusting the Resume and On-Screen Guide Settings
1. When a DVD is not playing, press the
button on the remote control.
2. Press to highlight
and display the
OTHERS
Setup menu.
3. Press
to highlight
RESUME
or
ON SCREEN GUIDE
, then press
to display the
ON/OFF
selection box.
4. Press
to select the setting you want, then press
to save it.
■ RESUME:
This setting defines the way playback resumes after pausing. To have
playback resume from the point where it was stopped, set to
ON
(the default). To
have playback start from the beginning of the chapter, set to
OFF
.
■ ON SCREEN GUIDE:
This setting, which is
ON
by default, briefly displays an
indicator on the screen when you pause, resume, or use other playback controls.
Select OFF if you don’t want these indicators to be displayed.
5. To return to the previous menu level, press
.