Epson MovieMate 30s - Manual (Page 42)

42
Doing More with MovieMate
Adjusting General Audio Settings
MovieMate provides several settings for adjusting the audio quality and volume.
■ To adjust the treble, use the Treble buttons on the remote control.
■ To adjust the sound mode, press . Continue pressing the button
to select the JVC original sound system setting that you prefer:
NATURAL: Produces a broader, more natural sound.
SMOOTH : Produces a sound that is more pleasant to the ear.
OFF: Disables the JVC original sound system (default).
■ To adjust the bass, you can use the crossover knob on the back of the
optional subwoofer.
To adjust detailed settings, use the Audio Setup menu as described
below.
Adjusting DVD Movie Sound Levels
The default sound setting plays DVD movies at a higher volume than other discs. You can
adjust this setting if necessary.
To adjust the DVD movie sound level overall, press . Continue pressing the button to
select the level you prefer: DVD LEVEL 1 , DVD LEVEL 2 , or DVD LEVEL 3 (the highest
volume and default setting).
To adjust detailed settings, use the Audio Setup menu as described below.
Adjusting Detailed Audio Settings
To adjust detailed audio settings in the Audio Setup menu, follow these
steps:
1. Press the button on the remote control.
2. Press to highlight and display the AUDIO Setup menu.
3. Press to highlight the setting you want, then press to
display the options.