Epson MovieMate 30s - Manual (Page 53)

Caring for MovieMate
53
Transporting MovieMate
Note: Epson shall not be liable for any damages incurred during transportation.
MovieMate contains many glass and precision parts. If you need to transport it, follow these
guidelines to prevent damage:
■ When shipping MovieMate for repairs, use the original packaging material if possible. If
you do not have the original packaging, use equivalent materials, placing plenty of
cushioning around MovieMate. Be sure the carrier is capable of transporting fragile
equipment and is aware that MovieMate is fragile. Remove the lens cover and wrap it
separately.
■ If you move MovieMate from a cold environment into a warm room, condensation
(moisture) may form internally or on the lens surface. To avoid damage that might be
caused by condensation, wait approximately an hour before using MovieMate. If
condensation forms, turn on the main power switch, then wait an hour or two before use.
■ When you are hand-carrying MovieMate, remove all discs, close the tray, and make sure
the lens cover is securely in place. To avoid damaging the mesh covering the speakers, lift
MovieMate as shown below: