Eicon Networks DIVA LAN ISDN - Manual (Page 110)

Chapter Nine: Advanced Installations Connection retries 110
Connection retries
The connection retry parameter controls how many times the DIVA LAN ISDN Modem attempts to establish a
connection using a specific profile. If the profile cannot be connected using either its primary telephone
number or backup telephone number, it is disabled, and the DIVA LAN ISDN Modem attempts to connect
using a backup profile instead.
Once a profile has been disabled, it must be re-enabled before it can be used again. There are three ways to
re-enable a profile"
• manually dial it
• reset the DIVA LAN ISDN Modem
• set the profile to be re-enabled automatically by defining a value for the Profile restore delay parameter
To define retry settings
1. On the Configuration main menu, click Connection Profiles.
2. Click Edit for the profile you want to adjust the retry settings for.
3. Click Connection on the menu bar. You will see the following page.
4. Set Max retries. to the number of times you want to dial when trying to connect. Dialing attempts alternate
between Telephone number 1/2 and Backup Telephone number 1/2.
5. Set Retry delay to the number of seconds the DIVA LAN ISDN Modem should pause between dialing
attempts.
6. Click Finish.
7. Click Save.
8. Click Reset.