Eicon Networks DIVA LAN ISDN - Manual (Page 160)

Appendix B: Technical Information Resetting the DIVA LAN ISDN Modem 160
Resetting the DIVA LAN ISDN Modem
The Reset button is located on the back of the DIVA LAN ISDN Modem.
Two reset options are available:
Resetting operational settings
Use this to activate configuration settings you have made.
To reset
• Press and release the Reset button quickly. All the ISDN lights and the Fault light will flash, followed by
all the ETHERNET lights. The lights then return to normal operation.
Using this option is equivalent to clicking the Reset button on the Configuration main menu in the Web-based
configuration interface (page 48).
Resetting to factory defaults
Use this option to reset the DIVA LAN ISDN Modem to its factory default settings. Resetting to factory
defaults erases the system password and returns all parameter setting to their defaults. You can use the
web-based configuration interface to back up your configuration settings before you reset.
To reset
• Press and hold the reset button for 15 seconds.
• All lights (except POWER) will go out.
• After five seconds, the B1 and B2 indicator lights will turn red.
• Continue to hold the reset button until these lights go off. If you let go before the lights go off, you may
not completely reset the DIVA LAN ISDN Modem and you may not be able to communicate with it.
You can also reset to factory defaults using:
• the Web-based configuration interface (page 160)
• the command line interface (page 146)
• a touch tone phone (page 145)
ISDN
PHONE ETHERNET
1 2 E4 E3 E2 E1 CONSOLE
POWER
12VDC
Reset
Reset button