Eicon Networks DIVA LAN ISDN - Manual (Page 154)

Appendix A: TCP/IP Configuration Installing TCP/IP for Windows NT 154
Installing TCP/IP for Windows NT
Installing TCP/IP
1. On the Start menu, choose Settings, then choose Control Panel.
2. Double-click the Network icon. The Network dialog box appears.
3. Click the Protocols tab.
4. Click Add.
5. Select TCP/IP protocol as your network protocol.
6. Click OK.
7. Click Yes to use DHCP.
8. When prompted, insert the original Windows NT installation CD and enter d:\i386 (where d: is the drive
letter of your CD drive), and click Continue.
9. Click Close.
10. Click Yes when prompted to restart your system.
Configuring TCP/IP
1. On the Start menu, choose Settings, then choose Control Panel.
2. Double-click the Network icon. The Network dialog box appears.
3. Click the Protocols tab.
4. Select TCP/IP protocol.
5. Click Properties.
6. Select Obtain an IP address from a DHCP server.
7. Click the DNS tab.
8. Check if any DNS addresses are configured. If so, delete them.
9. Click OK.