Eicon Networks DIVA LAN ISDN - Manual (Page 182)

Appendix C: Command Line Reference IP various 182
IP various
SHOW ICMP STATISTICS
Valid context: General
Displays ICMP statistics.
SET IP REMOTE Ipaddr
Valid context: Profile
Sets the IP address of the remote device this profile connects to. Use this only in cases when a static IP address
is assigned to the remote site. In most cases, specify 0.0.0.0 to allow dynamic negotiation of the address when
the connection is established.
Dynamic negotiation is not supported by the LAN profile.
SET IP ADDRESS Ipaddr
Valid context: Profile
Sets the IP address this profile should use in cases when a static address is assigned to the DIVA LAN ISDN
Modem by your ISP or network administrator. In most cases, specify 0.0.0.0 to allow dynamic
negotiation when the connection is established.
Dynamic negotiation is not supported by the LAN profile.
SHOW IP ADDRESS
Valid context: General
Displays the current IP addresses for the DIVA LAN ISDN Modem. The addresses
you see might not be those that are defined, but rather those as negotiated by IP. For example, if an IP address
is set to 0, it is negotiated to a new value when the device connects. This command only displays the addresses
that apply to the current profile, or all addresses if executed from the general context.
SET IP BACKUP profilename
Valid context: Profile
Specifies the backup profile to use when this profile cannot connect. The backup profile is invoked when the
maximum number of connection retries has been exceeded.
SET IP DESCRIPTION description
Valid context: Profile
Sets the description for this IP interface.
description: 39 alphanumeric characters.
SET IP MASK Ipaddr
Valid context: Profile
Sets the subnet mask for this profile.
SHOW IP STATISTICS
Valid context: General
Displays statistics for the IP protocol.
SHOW IP STATUS
Valid context: General
Displays IP status information and all configured IP addresses.