Eicon Networks DIVA LAN ISDN - Manual (Page 127)

Chapter Nine: Advanced Installations IP routes 127
• Gateway address: Only used if the Interface is set to LAN. This is the address of the device you
want to send the routed traffic to. This will usually be the address of a bridge or router.
• Interface: Choose the name of the profile you want to send the routed data to. The profile you
choose should establish a connection to the proper destination so that routing is successful. If you
select LAN, data is routed onto the local Ethernet LAN created by the DIVA LAN ISDN Modem.
• Metric: Metric determines the weight of a route. If two identical routes exist, then the DIVA LAN
ISDN Modem uses the route with the lower metric.