Isdn – Eicon Networks DIVA LAN ISDN User Manual

Page 184

Advertising
background image

Appendix C: Command Line Reference

ISDN

184

ISDN

ENABLE ISDN TEISHARING
DISABLE ISDN TEISHARING

Valid context: General

Enables or disables the sharing of TEI assignments. Some switches only make two TEIs available for an ISDN
line. Therefore, if you are using AO/DI, enable this option. This shares the TEI between channels B1 and D.

TEISHARING is disabled by default and is only available if TEI assignment is

dynamic (SET ISDN TEI DYNAMIC).

ENABLE ISDN ANSWER
DISABLE ISDN ANSWER

Valid context: General

Specifies if the DIVA LAN ISDN Modem will answer incoming ISDN data

calls. If disabled, incoming data calls are ignored. This parameter is

disabled by default.

SET ISDN BILLINTERVAL initialTime recurringTime

Valid context: General

Allows you to minimize your ISDN charges by controlling the frequency with which the DIVA LAN ISDN
Modem will enable and disable an ISDN channel.

initialTime: The minimum amount of time that an ISDN channel will be

enabled for. Range: 0 to 1800 seconds. Default: 60 seconds.

recurringTime: The minimum amount of time that an ISDN channel remains enabled after initialTime is
surpassed. Range: 10 to 1800 seconds. Default: 60 seconds.

SET ISDN DN channel isdnNumber [DATA]

Valid context: General

Sets your ISDN telephone number. ISDN telephone numbers are defined by your ISDN provider to identify
your ISDN equipment. Enter 20 digits followed by a dot followed by a 20 digit subaddress (optional). Note that
the following three characters will be removed after the number is entered: hyphen, space, parenthesis.

channel: First or second ISDN number. Range: 1 to 2.

isdnNumber: ISDN phone number.

DATA: International version only. Enables enhanced support for data traffic on the selected port. Throughput is
increased, but supplementary calling services are not supported.

SET ISDN TELEPHONE channel isdnNumber

Valid context: General

This command is an alias for SET ISDN DN.

SET ISDN TELEPHONE channel isdnNumber [DATA]

Valid context: General

This command is an alias for SET ISDN DN.

Advertising