Eicon Networks DIVA LAN ISDN - Manual (Page 190)

Appendix C: Command Line Reference MLPPP 190
MLPPP
SET MLPPP LINKUP threshold delay [channel]
Valid context: Profile/PPP
Sets the conditions that define when the DIVA LAN ISDN Modem brings up an ISDN B-channel.
threshold: Percent usage of the current channel. Range: 50 to 100%. Default: 70%.
delay: How long usage must stay at threshold before the B-channel is brought up. Range: 1 to 120 sec. Default:
5 sec.
channel: ISDN B-channel to bring up. Range: 1 to 2. Default: assign to both B-channels.
SET MLPPP LINKDOWN threshold delay [channel]
Valid context: Profile/PPP
Sets the conditions that define when the DIVA LAN ISDN Modem brings down an ISDN B-channel. This can
never result in the termination of a connection. If only one channel is in use, no action is taken.
threshold: Percent usage of the previous last channel. Range: 0 to 50%. Default: 40%.
delay: How long usage must stay at threshold before channel is brought down. Range: 1 to 120 sec. Default: 5
sec.
channel: ISDN channel to bring down. Range: 1 to 2. Default: assign to both channels.
SET MLPPP POLICY {AUTO | DONLY}
Valid context: Profile/PPP
Determines ISDN line usage when AO/DI is enabled.
AUTO: Data is transferred on the D-channel, plus both B-channels if required.
DONLY: Data is only transferred on the D-channel.
SET MLPPP MODE {DISABLE | NORMAL | BACP | AODI}
Valid context: Profile/PPP
The DIVA LAN ISDN Modem uses multilink PPP to combine both ISDN B-channels into a single 128 kbps
communications link.
DISABLE: Disable MLPPP support.
NORMAL: Enable MLPPP support.
BACP: The DIVA LAN ISDN Modem uses BACP to monitor incoming and outgoing traffic, and to open or
close your second ISDN channel as the traffic volume warrants. This reduces your communications charges by
ensuring that two ISDN channels are never active when one is sufficient.
AODI: Always On/Dynamic ISDN lets you maintain a permanent D-channel connection for low-bandwidth
applications. AODI incorporates BACP, ensuring that ISDN channels are automatically activated/deactivated in
response to data traffic.
SHOW MLPPP CONFIGURATION
Valid context: Profile/PPP
Displays MLPPP configuration settings, including BACP and AO/DI.