Eicon Networks DIVA LAN ISDN - Manual (Page 199)

Appendix C: Command Line Reference RIP 199
RIP
ENABLE RIP [V1 | V2 | V2COMPATIBLE | MERGE]
Valid context: Profile
Enables or disables support for RIP (routing information protocol). When enabled, the DIVA LAN ISDN
Modem will exchange routing information with other devices.
V1: Supports RIP version 1.
V2: Supports RIP version 2.
V2COMPATIBLE: Supports RIP version 2 that is version 1 compatible (implies
broadcasting RIP-2).
MERGE: Merge equivalent routes.
DISABLE RIP [MERGE]
Valid context: Profile
Disables all RIP services.
MERGE: RIP will not merge similar routes.
SHOW RIP CONFIGURATION
Valid context: Profile
Display RIP configuration settings.
SHOW RIP STATISTICS
Valid context: General
Displays RIP statistics.
SET RIP UPDATE period
Valid context: General
Specifies the amount of time RIP waits between sending updates to its peers.
period: Time in seconds between updates. Default 30 sec.
SET RIP POLICY {SILENT | PERIODIC}
Valid context: Profile
Specifies how RIP manages route updates, requests, and responses.
SILENT: RIP accepts updates from other systems, but will not respond to requests or send updates.
PERIODIC: RIP operates normally: A complete update is sent to all neighbors and all incoming requests are
responded to. (LAN only)
ADD RIP REJECT ipaddr
Valid context: General
Adds or deletes an IP address. RIP ignores all routing information received from peers with IP address that
appears in the RIP Reject table.
ipaddr: IP address of peer to ignore.