Hpj3113a 10/100base-tx card, Leds, Hp j3113a 10/100base-tx card -10 – HP 300X User Manual
Page 24: Leds -10
Advertising
2-10 Installing 600N (EIO) Internal Print Servers
HP J3113A 10/100Base-TX Card
The HP JetDirect 600N 10/100Base-TX card has LEDs and
configuration jumpers.
LEDs
On the HP JetDirect 600N 10/100Base-TX card, there are LEDs on
the network connector that indicate the operating speed (10Mbps or
100Mbps).
Note
The HP JetDirect 10/100Base-TX print server may
require up to 10 seconds to establish a link to the
network.
If the 10 (left)
LED is...
And the 100
(right) LED is...
Then the print server has...
Off or blinking
Off or blinking
No link established.
On
Off
Link established at 10 Mbps.
Off
On
Link established at 100 Mbps.
Jumpers
P1, P2, P3
LEDs
qsF00_en.book Page 10 Monday, June 26, 2000 3:15 PM
Advertising