Leds, Leds -5 – HP 300X User Manual
Page 31
Installing External Print Servers 3-5
External Pri
n
t
Servers
3
When you first press the Test button, the Status and Activity LEDs
are on and solid for about 5 seconds. Then they switch off, indicating
they are cycling through the PDLs.
LEDs
On the top of the print server are Status and LAN Activity LEDs:
Between the Status and LAN Activity LEDs is the Test button, used
to print a configuration page. See “Verifying the Hardware
Installation” (page 3-4) for more information.
If the Status
LED is...
And the
Activity LED
is...
Then the print server is...
Off Off
Not
receiving
power.
On Off
On;
no
LAN
activity
detected.
On
Blinking
On; LAN activity detected.
Off
On (Solid)
Encountering a fault during self-test or operation.
Blinking
Off
Encountering one of the following conditions:
●
running a self-test
●
not configured.
●
not able to attach to the network.
On
On
On; heavy LAN activity detected.
qsF00_en.book Page 5 Monday, June 26, 2000 3:15 PM