Heat & Glo Fireplace 6000G-IPI - Manual (Page 62)

Heat & Glo • 6000G, 6000G-IPI • 2103-900 Rev. M • 9/08 62
DVP-HRC-SS
DVP-HRC-ZC-SS
HORIZONTAL TERMINATION CAP
13 in.
(330 mm)
15 in.
(381 mm)
8-1/8 in.
(206 mm)
10-7/8 in.
276 mm
10-1/2 in.
267 mm
3°
87°
Effective Length
5-3/4 to 8-3/8 in.
146 to 213 mm
5-1/2 in.
140 mm 8-3/8 in.
213 mm
Figure 16.6 DVP vent components
B. Vent Components Diagrams (continued)
Fire Risk.
• When using DVP-HRC-SS and DVP-HRC-ZC-
SS termination caps on top vented fi replaces, a
6 inch minimum vertical vent section is required
before installing fi rst elbow.
WARNING