Husqvarna HUSKYSTAN C20 - Manual (Page 25)

25
NEEDLE THREADER
Attention: Turn power switch to the off
position (“O”).
Raise the needle to its highest position and
lower the presser foot.
1. Lower the needle threader lever slowly
and draw the thread through the thread
guide as illustrated and then to the right.
2. The needle threader automatically turns
to the threading position and the tiny hook
passes through the needle eye.
3. Take the thread in front of the needle into
the hook from the bottom as illustrated.
4. Hold the thread loosely and release the
lever slowly. The hook will turn and pull
the thread through the needle eye forming
a loop.
Pull the rest of the thread through the
needle eye.