Husqvarna HUSKYSTAN C20 - Manual (Page 58)

58
MEMORY - MODEL C20
Combined patterns can be stored for later use. Since stored patterns are not lost after the sewing
machine is turned off, they can be recalled at any time. This is convenient for patterns, such as
names, that will be used often.
Please Note:
- The machine has a program memory that can retain 30 units of stitches.
- Multiple patterns selecting from pattern modes “ , “ can be combined and
sewn together.
- All the units in the memory can be edited to set its function such as Stitch length, Stitch
width, Mirroring and Auto-lock.
- The Direct mode patterns and buttonholes can not be memorized.
Programming patterns
1. When you turn the machine “ON”, the LCD screen
displays “ “ .
2. Press the “ “ button to enter the memory
mode, and store the combinations of character or
decorative stitches.
3. Press the “ “ button to select any desired
pattern group among “ ” or “ ” on the
LCD screen. Then press the desired pattern
number (E.g.13). (You can change the stitch length,
width, or choose the Auto-stop, mirroring function if
desired.)
Repeat step 3 for more patterns to be stored in the
memory.
Please Note: When the maximum of 30 units
of patterns has been programmed, the machine
will beep to signal the memory is full.