Husqvarna HUSKYSTAN C20 - Manual (Page 57)

57
Recall and sew the memorized pattern
1. Press the “ “ button to enter the memory
mode. The machine will be positioned at the fi rst
programmed stitch.
2. Press the foot control. The machine will start to
sew from fi rst entered pattern. On the LCD screen,
sewing stitch data is indicated.
3. If you wish to check what is programmed or if you
wish to start sewing a few stitches in the memory
mode, use the “
” button or “ “ button.
You can use the Auto-lock “ “ function when the
sewing machine is stopped.
Please Note: If you wish to repeat your stitch combination without having the machine stop
press the Auto-lock “ “ button to cancel the Auto-Stop in the memory mode. The “
”
will disappear from the LCD screen.
4. Press the “ “ button to leave the memory mode
and return to the Direct mode.