Husqvarna HUSKYSTAN C20 - Manual (Page 27)

27
BRINGING UP THE BOBBIN THREAD
1. Hold the upper thread with the left
hand. Turn the handwheel toward
you (counterclockwise) lowering, then
raising the needle.
2. Gently pull on the upper thread to
bring the bobbin thread up through the
needle plate hole. The bobbin thread
will come up in a loop.
3. Pull both threads to the back under the
presser foot.
CUTTING THE THREAD
Raise the presser foot. Remove the fabric,
draw the threads to the left side of the face
cover and cut using the thread cutter.
The threads are cut at the proper length to
start the next seam.