Husqvarna HUSKYSTAN C20 - Manual (Page 55)

55
MEMORY - MODEL C10
Combined patterns can be stored for later use. Since stored patterns are not lost after the sewing
machine is turned off, they can be recalled at any time.
Please Note:
- The machine has a program memory that can retain 30 units of stitches.
- All the units in the memory can be edited to set its function such as Stitch length, Stitch
width, Mirroring and Auto-lock.
- The Direct mode patterns and buttonholes can not be programmed.
Programming patterns
1. When you turn the machine “ON”, the LCD screen
displays “ “ .
2. Press the “ “ button to enter the memory mode,
to program combinations of character or decorative
stitches.
3. Press the “ “ button to select any desired
pattern among “ ” on the LCD screen. Then
press the desired pattern number (E.g.13). (You
can change the stitch length, width, or choose the
Auto-stop, mirroring function if desired).
Repeat step 3 for more patterns to be stored in the
memory.
Please Note: When the maximum of 30 units of
patterns has been programmed, the machine will
beep to signal the memory is full.