Husqvarna HUSKYSTAN C20 - Manual (Page 64)

64
3. Remove the needle, presser foot and
presser foot holder.
Remove the bobbin cover plate and
bobbin. Remove the screw holding the
needle plate and remove the needle plate.
4. Lift up the bobbin case and remove it.
5. Clean the hook race, feed dog and bobbin
case with a brush. Also clean them, using
a soft, dry cloth.
6. Replace the bobbin case into the hook
race so that the tip (a) fi ts to the stopper
(b) as shown.
7. Replace all other parts.