Husqvarna HUSKYSTAN C20 - Manual (Page 44)

44
3. Select the buttonhole stitch. Adjust the
stitch width and the stitch length to the
desired width and density.
4. Position the fabric under the presser foot
so that the buttonhole mark is aligned with
the center of the buttonhole foot.
Pull down the buttonhole lever, then push
it to the back.
Please Note: When you select any
buttonhole pattern the LCD screen will
display the fi gure “
“, to remind you to
lower the buttonhole lever.
5. Lightly hold the end of the upper thread
and start sewing.
Please Note: Before stopping, the
machine will automatically sew a
reinforcement stitch after the buttonhole
is sewn.
Starting
point