Honeywell 9900 - Manual (Page 144)

9 - 6 Rev A
8/6/08
Dolphin® Power Tools User’s Guide
Route
Route is a kernel utility that allows the user to view and edit the rules that govern how packets destined
for various subnets are routed. These rules tell the device which gateways on a given interface's subnet
may be used to route packets to hosts on other subnets.
Route contains three tab windows: Input, Output, and About. You enter and execute the command on the
Input tab and review the results on the Output tab.
On the Network Menu window, tap the Route icon once .The Route screen opens to the Input tab.
Output tab
The Output tab displays the information that results from executing a command on the Input tab; it
displays no information on its own. See the individual tasks below to see the Output tab for each
command.
To Print Network Routing Tables
1. On the Input tab, select PRINT in the Command drop-down list.
Using the Input Tab
Field Description
Command This drop-down list contains the available routing commands. Select from:
• PRINT - Prints the network routing tables to the Output tab; see page 9-6 .
• ADD - Adds a route; see page 9-7 .
• DELETE - Deletes a route with a specified destination; see page 9-8 .
• CLEAR - Clears routing tables of all gateway entries; see page 9-8 .
Text under Command The text describes each command. The content changes automatically when a
command is selected from the Command drop-down list.
Execute Click this button to execute the selected command. The Output tab displays the
results.