Honeywell 9900 - Manual (Page 83)

Dolphin® Power Tools User’s Guide Rev A
8/6/08
5 - 5
SendMode Specifies the method to use when
sending the decoded message to the
foreground application.
Note: This setting affects only the
decoded message; the prefix and
suffix are always sent using the
virtual key method to allow
navigational functionality.
0 0=Virtual key method: each
character is sent as a virtual
keystroke. This method
works well with almost any
Windows Mobile application.
1=Direct Text method: the
decoded message is sent as
text directly to the window
that has the keyboard focus
in the foreground application.
This method is faster than the
virtual key and supports
barcodes with ASCII
characters between 1 and
255 but works only if the
foreground application uses
standard Window’s Edit
controls for user input.
2=Virtual Key (safe) method:
each character is sent as a
virtual keystroke using
PostKeybdMessage().
This method only support bar
codes containing ASCII
characters and does not
support VKMapping. This
method only generates
WM_CHAR messages, it
does not generate
WM_KEYDOWN and
WM_KEYUP messages.
GoodScanWav Specifies a .wav file played on the
completion of a successful decode/data
reception. Empty Empty=No .wav file is specified.
The default beep or sound is
played. Use the
Sound (page
5-3) key to enable and
disable all audio notification.
X=The path to the specific .wav
file you want played for either
option. The .wav files should
be 8-bit, 11KHz, mono, and
PCM.
BadScanWav Specifies a .wav file played for an
unsuccessful decode/data reception. Empty
Settings Section
The Settings section determines how ScanWedge interprets data from the decoder, serial port, and IrDA
interface.
0 = Disable 1 = Enable
Settings Section
Key Description Default
Value Available Values