Humax DV-1000T - Manual (Page 15)

**
1.3 Rear Panel
**
1. ANTENNA IN
**
Connects a antenna to a antenna cable.
**
2. TV/VCR
**
Connects a RF signal from your receiver to RF(ANT) input jack on your TV or VCR.
**
3. RS-232C
**
Connects to your PC to upgrade product's software programme.
**
4. S-Video
**
Connect your receiver to a TV or VCR that accepts S-Video input.
**
5. COMPONENT SELECT
**
RGB If you select RGB, you can connect to video, audio L and R.
YPbPr If you select YPbPr, you can connect your receiver to a TV or VCR that accepts
high-quality video input.
6. TV SCART
**
Connects a TV SCART cable.
**
7. VCR SCART
**
Connects a VCR SCART cable.
**
8. VIDEO
**
Connects to your TV or VCR and output Video signals.
**
9. AUDIO L/R
**
Connects to your TV or VCR and output Audio signals.
**
10.S/PDIF
**
Outputs the digital audio signals(S/PDIF).
**
1. Before Using the Receiver
GB 14
**
**
**
**
**
**
**
**
**
**
**
**
**
**