Humax DV-1000T - Manual (Page 27)

**
This chapter describes functions such as switching channel, volume control, and basic features for
watching programmes.
4.1 Switching Channel
You can switch the current channel using one of the following methods.
1. Press the CH-/CH+ button.
2. Enter your desired channel numeric using the NUMERICAL (0-9) buttons to move to the
channel directly.
3. Press the TV/RADIO button to switch between TV channel and Radio channel.
Note: You can switch channel using Programme Guide or Channel List. Please refer to
Chapter 5 and 6 for more information.
4.2 Volume Control
1. Press the V-/V+ buttons to adjust the audio volume of your TV.
2. Press the MUTE button to stop the sound of your TV temporarily.
Note: The mute function keeps enabled while you change the channel.
This function is only for TV. Refer to chapter 12 to set the TV.
4.3 Text and interactive services
If your chosen channel has teletext (MHEG) features , you can access them. Teletext services often
load automatically shortly after the Digital Teletext window is displayed. In which case, simply follow
the given instructions(press color buttons).
1. Press TEXT button to access teletext(MHEG) features.
2. Press TEXT button again to return to normal viewing.
3. Press the CH-/CH+ button to exit this service.
Note: You should select OFF from the subtitle language to display teletext(MHEG).
**
4. Basic Operation
GB 26
**
**
**
**
**
**
**
**
**
**
**
**
**
**