Humax DV-1000T - Manual (Page 20)

**
This chapter describes how to set up the receiver. Select the most appropriate procedure depending
on your requirements.
Note: If you encounter any problem when setting up the receiver, please contact your local
product distributor.
2.1 Connecting the Antenna for STB
1. Connecting TV and VCR with SCART
Connect the cable of your TV aerial to the ANTENNA IN connector on the rear of the receiver.
SCART and co-axial cable are connected as in the figure above.
**
**
2. Setup
GB 19
**
**
**
**
**
**
**
**
**
**
**
**
**
**