Humax DV-1000T - Manual (Page 98)

**
DVD only
1. Disc can't be played
- Ensure the disc label is upwards.
- Clean the disc.
- Check if the disc is defective by trying another disc.
- Check region code.
2. No return to start-up screen when disc is removed.
- Reset by switching the player off, then on again.
- Check to see if the proramme requires another disc to be loaded.
3. Distored sound from Hi-Fi amplifier
- Check to make sure that no audio connections are made to the amplifier phono input.
4. No color in picture
- The disc format is not according to the TV-set used.(PAL/NTSC)
Error Message (STB only)
Error message Possible causes What to do
No or bad signal The aerial is not pointing properly. Adjust aerial.
Check the cable from the aerial.If you
cannot resolve the problem you may
need to have your aerial and
installation tested by a professional.
The channel is
scrambled or not
available. The channel has signal, but no audio
or video. Confirm if the channel is currently on
air.
The channel is not deleted by
broadcasting company.
The channel is for data broadcasting. Cannot watch the channel in usual
way.
The channel is
scrambled. This digital terrestrial receiver does
not support the service that enables to
descramble the scrambled channels.
The audio is not
available. The channel has signal, but no Audio. Press the Audio button to confirm if
the channel has Audio.
**
**
GB 97
**
**
**
**
**
**
**
**
**
**
**
**
**
**