Humax DV-1000T - Manual (Page 57)

**
5. Network Search
If specified frequency channel information and other channel information are provided together, the
channel, which belongs to other frequency channel, is also searched.
Select one option between Enable and Disable using the button.
Note: You can search after the setting of Manual Search. Refer to 8.1 Automatic Search.
8.3 Default Setting
Default Setting restores the receiver to the default settings.
Warning: Please note that once you perform Default Setting, all data such as Channel List, and
User Configured data are deleted.
To perform Factory Default:
1. Press the MENU button.
2. Select Installation using the button, and press the
OK or button.
3. Enter Password using the NUMERICAL (0-9) button.
4. Select Default Setting using the button, press the
OK or button.
5. Select Yes and press the OK button to restore all
setting to Factory Default.
Select No and press the OK
or BACK button to
return to the previous menu.
6. Confirm again to start loading default setting. Enter Password using the NUMERICAL (0-9)
button to perform restoring.
7. When completing the default setting, press the OK button to automatically run the
Installation Wizard.
When default setting is completed, Installation Wizard is automatically displayed, which helps
Channel Search. For detailed information about Installation Wizard, refer to 3. Installation
Wizard.
**
8. Installation
GB 56
**
**
**
**
**
**
**
**
**
**
**
**
**
**