Humax DV-1000T - Manual (Page 47)

**
2. Setting Allow Watch Time
You can block programmes according to the watching time for all the channels.
1. Select the Allow Time Control using the button,
and press the or OK button.
2. Select Enable or Disable the Allow Time Control using
the button, and press the or OK button.
**
Disable You can watch whenever you want regardless of
Allow Time.
Enable You can watch only while the time specified by
Allow Time.
3. When you have selected Enable, set the Start and End
Time using the NUMERICAL (0-9) buttons, and press the
OK
button.
4. If you wish to cancel the entered time, select the Cancel
button, and press the OK button.
Note: Once the setting has been completed, you can watch programme only while the time
specified by Allow Time. Or you should enter the Password to watch any programme during
unspecified time.
3. Change Password
You can change the existing Password into new one.
1. Select Change Password using the button, and
press the OK or button.
2. Enter New Password using the NUMERICAL(0~9) button,
and select OK and press OK button.
3. Enter the New Password again to confirm the Verify
Password, and select OK and press the OK button.
Note: The Default Password is 0000. If you have forgotten your Password, please contact
your local product distributor.
**
7. Setting Preferences
GB 46
**
**
**
**
**
**
**
**
**
**
**
**
**
**