Humax DV-1000T - Manual (Page 56)

**
8.2 Manual Search
You can search channels manually by searching parameters, if you know the MUX information.
1. Select MENU button.
2. Select Installation using the button, and press the
OK or button.
3. Select Manual Search from Installation menu using the
button, and press the OK or button.
4. Select Channel, Frequency, Mode, Guard Interval or
Network Search using the button, and press the OK
or button.
**
1. Channel Number
Enter your desired frequency channel to search. When entering frequency channel value, the
appropriate frequency value is entered.
Select one of channel using the button, press the OK button.
2. Frequency
Enter the your desired frequency to search directly. When entering frequency, the appropriate
channel for the entered frequency is automatically displayed on Channel.
Enter frequency using the NUMERICAL(0~9) button and press OK button.
3. Mode
Required for Channel Search. If you don't know the value, please select Auto.
Select among Auto, 2k and 8k using the button, and press the OK button.
4. Guard Interval
Required for Channel Search. If you don't know the value, please select Auto.
Select one option among Auto, 1/4,1/8,1/16 and 1/32 using the button, and press the OK
button.
**
**
GB 55
**
**
**
**
**
**
**
**
**
**
**
**
**
**