Humax DV-1000T - Manual (Page 91)

**
4.3 Display
You can set video display.
1. Press the MENU button.
2. Select Display using the button, and press the OK
or button.
**
1. TV Aspect
**
You can set the aspect ratio of your TV.
1. Select TV Aspect using the button, and press the OK or button.
2. Select one option among 16:9 Widescreen/4:3 Letter Box/4:3 Pan&Scan using the
button, and press the OK button.
2. SCART Output
**
You can set the scart output.
1. Select SCART Output using the button, and press the OK or button.
2. Select one option among CVBS/S-Video/RGB using the button, and press the OK
button.
**
CVBS/S-Video/RGB If you set the YPbPr/RGB switch which is located in the back of
your receiver,LPCM to YPbPr with setting scart output to RGB,
the video signal is not output to scart. Please use the component
terminal.
3. On Screen Info
Display the option information.
Select On Screen Info using the button, and press the OK or button.
On Display the on screen information when you change the option.
Off Not display.
**
4. Settings (DVD part)
GB 90
**
**
**
**
**
**
**
**
**
**
**
**
**
**