Humax DV-1000T - Manual (Page 61)

**
5 Software Auto-Detecting and Time
You can specify the software detecting time.
If the receiver powers on during software auto-detecting, Detecting will stop.
1. Select Software Auto-Detecting from Software Update screen using the button.
2. Select Enable or Disable using OK or button whether or not setting the software
detecting time automatically.
3. When you select Enable, you can set the detecting time in the Auto-Detecting Time.
9.2 S/W Update from PC
You can connect your receiver to the PC directly and update your software by transferring the new
software from the PC. Follow these steps to download new software from PC to this product.
1. Download new software file (HDF files) equivalent for this product model from our website into
your computer(http://www.humaxdigital.com).
2. Download and install download tool file from our website into your computer.
3. Connect your PC to this product with RS-232C serial cable.
4. Execute installed download tool, and then follow the instructions contained the download tool.
5. Press the STANDBY button to make this product operating.
**
**
9. Software Update
GB 60
**
**
**
**
**
**
**
**
**
**
**
**
**
**