HP 1100A - Manual (Page 110)

110 Chapter 9 Troubleshooting the Copier/Scanner EN
Black dots or streaks
● There may be ink, glue, correction fluid, or an unwanted
substance on the scanner sensor. Try cleaning the scanner. See
“
Cleaning the scanner .”
Unclear text
● Try adjusting the settings.
• Copier Control Panel: see “ Using the Copier Control Panel .”
• Quick Copy settings: see “ Quick Copy settings .”
• Verify you have the correct resolution and gray-scale settings.
See “ Scanner resolution and gray scale .”
● You may need to change the properties settings for the
associated function in the Document Assistant or the
HP Document Desktop. Learn about these settings in the online
help. See “
Accessing the online help .”
Image prints at reduced size
● The HP software settings may be set to reduce the scanned
image. See the following:
• “ LaserJet Toolbox ” to change the settings in the Document
Assistant and the LaserJet Document Desktop.
• “ Quick Copy settings ” to change the settings for Quick Copies.
• “ Using the Copier Control Panel ” to change the settings for the
Copier Control Panel.