HP 1100A - Manual (Page 161)

EN Installing DIMMs (memory) 161
Installing DIMMs (memory)
Adding memory (RAM only) to the
HP LaserJet 1100 will enable you to
print more complex print jobs.
To install DIMMs, follow the instructions
below:
CAUTION
Handling a DIMM chip (memory) without
wearing a grounded, anti-static device
can damage the DIMM chip.
1 Unplug the printer.
2 Open the printer memory door by
gently pulling out and upward on the
bottom edge until the door supports
itself.
3 Remove the DIMM chip from the
anti-static bag in which it came by
grasping the chip on the top edge.
Continued on next page.
1
2
3