HP 1100A - Manual (Page 45)

EN Printing on both sides of the paper (manual duplexing) 45
Manual duplex (special)
heavy-media, card stock
For heavy media (card stock, etc.), use
the straight-through output path.
1 Adjust the paper-output lever to the
down position.
2 Access the printer properties. See
“
Printer properties (driver) .” On the
Finishing tab, click Manual Duplex
(special), and then click OK. Print
the document.
3 After side one has been printed,
remove the remaining paper from
the
paper input tray and set it aside
until after you finish your manual
duplexing job.
4 Gather up the printed pages from
side one, flip the stack, and then
straighten the stack before placing it
back in the paper input tray. Once
reloaded, page one should be
oriented upside down and located
closest to the front of the printer.
(The printed side should be facing
toward the back of the printer.)
Click OK (on screen), and then wait
for the pages to print.
1
2
3
4