HONDA GCV190 - Manual (Page 12)

12 ENGLISH
SPECIFICATIONS
GCV160
GCV190
Tuneup
Quick Reference Information
Length x Width x Height
(without electric start)
367 x 331 x 360 mm
(14.4 x 13.0 x 14.2 in)
Length x Width x Height
(with electric start)
367 x 354 x 360 mm
(14.4 x 13.9 x 14.2 in)
Dry weight (without electric start) 9.8 kg (22 lb)
Dry weight (with electric start) 11.6 kg (26 lb)
Engine type 4-stroke, overhead cam, single cylinder
Displacement
[Bore x Stroke] 161 cm 3 (9.8 cu in)
[64 x 50 mm (2.5 x 2.0 in)]
Net power *
(in accordance with SAE J1349) 3.3 kW (4.4 hp) at 3,600 rpm
Max. net torque *
(in accordance with SAE J1349) 9.4 N•m (6.9 ft-lb) at 2,500 rpm
Fuel tank capacity 0.93 l (0.25 US gal)
Oil capacity 55
l (0.58 US qt)
Cooling system Forced air
Ignition system Transistorized magneto
PTO shaft rotation Counterclockwise
Length x Width x Height 367 x 331 x 368 mm
(14.4 x 13.0 x 14.5 in)
Dry weight 12.3 kg (27.1 lb)
Engine type 4-stroke, overhead cam, single
cylinder
Displacement
[Bore x Stroke] 187 cm 3 (11.4 cu in)
[69 x 50 mm (2.7 x 2.0 in)]
Net power *
(in accordance with SAE J1349) 3.8 kW (5.1 hp) at 3,600 rpm
Max. net torque *
(in accordance with SAE J1349) 11.3 N•m (8.3 ft-lb) at 2,500 rpm
Fuel tank capacity 0.93
l (0.25 US gal)
Oil capacity 0.55 l (0.58 US qt)
Cooling system Forced air
Ignition system Transistorized magneto
PTO shaft rotation Counterclockwise
* The power rating of the engine indicated in this document is the net
power output tested on a production engine for the engine model and
measured in accordance with SAE J1349 at 3600 rpm (net power) and
2500 rpm (max. net torque). Mass production engines may vary from this
value. Actual power output for the engine installed in the final machine will
vary depending on numerous factors, including the operating speed of the
engine in application, environmental conditions, maintenance, and other
variables.
ITEM SPECIFICATION MAINTENANCE
Spark plug gap 0.7 ~ 0.8 mm
(0.028 ~ 0.031 in)
Refer to page 8.
Valve clearance (cold) IN: 0.15 ± 0.04 mm
EX: 0.20 ± 0.04 mm
See your authorized
Honda dealer.
Other specifications No other adjustments needed.
Fuel Type Unleaded gasoline with a pump octane
rating of 86 or higher (page 6).
Engine Oil Type SAE 10W-30, API SJ or later, for general
use. ** Refill amount: 0.35 ~ 0.40
l
(12.0 ~ 13.5 oz)
Carburetor Idle Speed 1,400 ± 150 rpm
Spark plug NGK BPR6ES - Pressure washer applications
BPR5ES - All other applications
Maintenance Before each
use Check engine oil level. Refer to page 7.
Check air filter. Refer to page 7.
First 5 hours Change engine oil. Refer to page 7.
Subsequent Refer to the maintenance schedule on
page 6.
** Actual amount will vary due to residual oil remaining in the engine. Always
use the dipstick to confirm the actual level (see page 7).
POM52684-N.book Page 12 Friday, May 2, 2008 9:05 AM