Hand Held Products 4620 - Manual (Page 35)

IMAGETEAM™ 2020/4620 System Manual 2 - 5
USB HID
Scan the following code to program the IT4620 for USB HID bar code imagers.
Scanning this code changes the terminal ID to 131.
USB Com Port Emulation
Scan the following code to program the IT4620 to emulate a regular RS-232-
based Com Port. If you are using a Microsoft® Windows® PC, you will need to
download a driver from the Hand Held Products website
(www.handheld.com) .
The driver will use the next available Com Port number. Apple® Macintosh
computers recognize the imager as a USB CDC class device and automatically
uses a class driver. Scanning the code below changes the terminal ID to 130.
Note: No extra configuration (e.g., baud rate) is necessary.
CTS/RTS Emulation
ACK/NAK Mode
USB HID Bar Code Imager
USB COM Port Emulation
CTS/RTS Emulation On
* CTS/RTS Emulation Off
ACK/NAK Mode On
* ACK/NAK Mode Off