Honeywell FUSION - Manual (Page 107)

PAN / TILT / ZOOM
7–5
7.3 ADVANCED PTZ SETUP, CONTINUED
1 Camera Menu Opens the OSD PTZ camera menu.
2 On-Screen Compass Allows On-Screen control of a PTZ camera.
3 RS-232 / RS-485 Defines how to send the PTZ signal to the camera.
4 Select Camera Selects the current camera to be edited.
5 Port Settings Defines the specific settings to transmit to the PTZ.
6 Enable Pan/Tilt Enables the DVR to control the PTZ camera.
7 Preset and Tour Used to create Presets and Tours for the PTZ
camera. Since each camera creates these in a
different way, there can be multiple methods.
8 Protocol Selects the protocol to use for the selected camera.
The protocol is the unique set of instructions that
allows the DVR to communicate with the PTZ
camera.
9 PTZ Status on Close This option will activate a Tour or Preset when the
PTZ controller is closed.
10 Address Setting Only available on select PTZ cameras. These options
need to be set when there are more PTZ cameras
connected together than there are inputs on the
DVR. Setting these options allows for attaching
several DVRs to the PTZ chain.
11 Open PTZ Controller Opens the PTZ controller, allowing the PTZ camera
to move.
Pan Speed Increases or decreases the Pan speed.
Tilt Speed Increases or decreases the Tilt speed.
Zoom Speed Increases or decreases the Zoom speed.
12
Focus Speed Increases or decreases the Focus speed.