Honeywell FUSION - Manual (Page 52)

FUSION DVR Digital Recording and Transmission System
5–8
5.4 GENERAL SETUP, CONTINUED
5.4.2 INTENSIVE RECORDING OVERVIEW
The Intensive Recording Option allows increasing of the Pictures Per Second and the
resolution of any camera recording using sensor activation. When the intensive
recording is activated, the resolution of the remaining cameras is immediately reduced
to 360x240 and the Pictures per second to a user specified level. This is done to
guarantee that the Pictures Per Second and Resolution will be set correctly and not
exceed the DVR limitation.
1 2 3 4 6 5
1 Enable Intensive
Recording
Enables the association of intensive recording to
sensors.
2 Non-Intensive
Channel
Adjusts the frame rates for the non-intensive
channels. The channels will drop their current settings
and be forced to use this setting.
3 Intensive Channel Adjusts the frame rate for the intensive channel.
4 Intensive Channel
Resolution
Adjusts the resolution for the intensive channel.
5 Non-Intensive
Channel Resolution
The DVR automatically adjusts the non-intensive
channels down to the system default. This setting
cannot be changed.
6 Holding Duration Adjusts the amount of time to hold the intensive
recording active.