Honeywell FUSION - Manual (Page 66)

FUSION DVR Digital Recording and Transmission System
5–22
5.6 RECORDING SCHEDULE, CONTINUED
Steps 16-22: Schedule Sensor #6 to activate Relay #8 when an Alarm occurs.
NOTE - This will not cause any cameras to record.
16. Select Sch03 from the Schedule Number drop down list.
17. Select the Single Day Selection button, then select Yes.
18. Place a check in the boxes for SUN, MON, TUE, WED, THU, FRI, and SAT
days of the week.
19. On the Sch03 line (time selector grid), highlight the hours 00-23 and press Set.
20. Press Sensor button #6.
21. Press Relay button #8.
22. Press Apply to save.