HP 3500 - Manual (Page 146)

Control panel message Description Recommended action
FLASH IS
WRITE PROTECTED
alternates with
Ready
To clear press
For the HP Color LaserJet 3700 series
printer only.
The file system is protected and no new
files can be written to it.
1. To enable writing to the Flash
Memory, turn off write protection
using HP Web Jetadmin.
2. To remove this message from the
display, turn the printer off and then
back on.
See HP Web Jetadmin for more
information.
Genuine HP
supplies installed
A new HP cartridge has been installed.
The printer returns to the Ready state
after approximately 10 seconds. No action necessary.
GENUINE HP SUPPLIES
DESIGNED FOR <PROD>
This genuine HP supply was not
designed for this printer and is not
supported. Print quality might be
affected. Replace this supply with a genuine HP
supply designed for this printer.
Incorrect Access to the menu is restricted. Contact the network administrator.
INCORRECT <COLOR>
CARTRIDGE
alternates with
For help press ?
A color cartridge is installed in an
incorrect slot or the cartridge is the wrong
type, and the cover is closed. Press for help.
or
See Changing print cartridges for more
information.
INCORRECT SUPPLIES
For status press
At least one supply item is incorrectly
positioned in the printer and another
supply item is missing, incorrectly placed,
out, or low. Press and then press for help.
or
See Replacing supplies and parts for
more information.
Initializing This message is displayed when the
printer is turned on, as soon as the
individual tasks begin initialization. No action necessary.
Initializing
permanent storage
This message is displayed when the
printer is turned on to show that
permanent storage is being made ready
for use. No action necessary.
INSTALL <COLOR>
CARTRIDGE
alternates with
For help press ?
The cartridge is either not installed or not
correctly installed in the printer. Press for help.
or
See Changing print cartridges for more
information.
INSTALL FUSER
For help press ?
The fuser is either not installed or not
correctly installed in the printer. Press for help.
or
See Replacing the fuser and pickup roller
for more information.
134 Chapter 8 Problemsolving ENWW