HP 3500 - Manual (Page 161)

Control panel message Description Recommended action
59.X
PRINTER ERROR
alternates with
To continue
turn off then on
A printer motor error has occurred. 1. Turn the printer off and then back
on.
2. If the message persists, contact
HP Support.
Note
This message might also appear if the
transfer unit is missing or incorrectly
installed. Ensure that the transfer unit is
correctly installed.
62 NO SYSTEM No system was found. 1. Turn the printer off and then back
on.
2. If the message persists, contact
HP Support.
64 PRINTER ERROR
For help press ?
alternates with
To continue
turn off then on
Scan buffer error. 1. Turn the printer off and then back
on.
2. If the message persists, contact
HP Support.
68.X PERMANENT
STORAGE FULL
alternates with
To continue press
A non-volatile storage device is full.
Press to clear the message. Printing
can continue, but there could be
unexpected behavior.
X Description
1 for removable disk (flash or hard)
0 for onboard NVRAM
1. Press to continue.
2. For 68.0 errors, turn the printer off
and then back on.
3. If a 68.0 error persists, contact
HP Support.
4. For 68.1 errors, use the HP Web
Jetadmin software to delete files
from the disk drive.
5. For 68.1 errors that persist, contact
HP Support.
68.X PERMANENT
STORAGE WRITE FAIL
alternates with
To continue press
A non-volatile storage device is full.
Press to clear the message. Printing
can continue, but there could be
unexpected behavior.
X Description
0 for onboard NVRAM
1 for removable disk (flash or hard)
1. Press to continue.
2. If the problem persists, contact
HP Support.
68.X STORAGE ERROR
SETTINGS CHANGED
alternates with
To continue press
One or more printer settings saved in the
non-volatile storage device is invalid and
has been reset to its factory default.
Press to clear the message. Printing
can continue, but there could be
unexpected behavior. 1. Press to continue.
2. Turn the printer off and then back
on.
3. If the message persists, contact
HP Support.
ENWW Control panel messages 149