HP 3500 User Manual

Page 189

Advertising

Issue

Cause

Solution

Transparencies or glossy paper
will not feed

Unsupported transparencies
may have been loaded.

Use transparencies designed
for HP Color LaserJet printers.

The correct paper type is not
specified in the software or
printer driver.

Verify that the correct paper
type is selected in the software
or printer driver.

The tray is overfilled.

Remove excess paper from the
tray. Make sure the paper does
not exceed the maximum stack
height indicator mark in Trays 2
or 3. Do not exceed the
maximum stack height for
Tray 1.

Paper in another tray is the
same size as the
transparencies, and the printer
is defaulting to the other tray.

Make sure that the tray
containing the transparencies or
glossy paper is selected in the
software application or printer
driver. Use the printer control
panel to configure the tray to
the paper type loaded.

The tray containing the
transparencies or glossy paper
is not configured correctly for
type.

Configuring trays

Envelopes jam or will not feed
in the printer

Envelopes are loaded in an
unsupported tray. Only Tray 1
can feed envelopes.

Load envelopes into Tray 1.

Envelopes are curled or
damaged.

Try using different envelopes.
Store envelopes in a controlled
environment. See

Envelopes

for

more information.

Envelopes are sealing because
the moisture content is too high.

Try using different envelopes.
Store envelopes in a controlled
environment.