HP 3500 - Manual (Page 55)

Clearable warnings (available for the hp color LaserJet 3700
series printer)
You can determine the display time of control panel clearable warnings with this option by
selecting ON or JOB. The default value is JOB.
● ON displays clearable warnings until you press .
● JOB displays clearable warnings until the end of the job for which it was generated.
To set the clearable warnings
1. Press M
ENU
to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press to select SYSTEM SETUP.
6. Press to highlight CLEARABLE WARNINGS.
7. Press to select CLEARABLE WARNINGS.
8. Press or to select the appropriate setting.
9. Press to set the selection.
10. Press M
ENU
.
Auto continue
You can determine printer behavior when the system generates an Auto Continuable error.
ON is the default setting.
● ON displays an error message for ten seconds before automatically continuing to print.
● OFF pauses the print job any time the printer displays an error message and until you
press .
To set the auto continue
1. Press M
ENU
to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press to select SYSTEM SETUP.
6. Press to highlight AUTO CONTINUE.
7. Press to select AUTO CONTINUE.
8. Press or to select the appropriate setting.
9. Press to set the selection.
10. Press M
ENU
.
ENWW Changing printer control panel configuration settings 43