HP 3500 - Manual (Page 202)

Issue Cause Solution
Partial printout A memory error message
appears on the printer control
panel. 1. Free up printer memory by
deleting unneeded
downloaded fonts, style
sheets, and macros from
printer memory.
or
2. Add more memory to the
printer.
The file you are printing
contains errors. Check the software application
to verify that the file does not
contain errors.
1. Print another file that you
know is error-free from
within the same application.
or
2. Print the file from another
application.
Manual 2-sided print job is
ordered incorrectly A manual 2-sided print job was
requested with the option
Correct Order for Rear Bin
selected, but the lower rear
door (rear output bin) was not
open. Open the lower rear door (rear
output bin) and send the print
job again.
Smears, vertical lines, toner
specks, or repetitive marks
appear on printouts The printer engine needs to be
cleaned. Clean the printer. See Cleaning
the printer . If the problem
persists, see Print quality
troubleshooting .
Guidelines for printing with different fonts
● The 80 internal fonts are available in PostScript Emulation (PS) and PCL mode.
● To conserve printer memory, download only those fonts that are needed.
● If you require several downloaded fonts, consider installing additional printer memory.
Some software applications automatically download fonts at the beginning of each print job. It
might be possible to configure those applications to download only soft fonts that are not
already resident in the printer.
190 Chapter 8 Problemsolving ENWW