HP 3500 - Manual (Page 101)

Configuration page
Use the configuration page to view current printer settings, to help troubleshoot printer
problems, or to verify installation of optional accessories, such as memory (DIMMs), paper
trays, and printer languages.
1. Press M
ENU
to enter the MENUS.
2. Press to highlight INFORMATION.
3. Press to select INFORMATION.
4. Press to highlight PRINT CONFIGURATION.
5. Press to select PRINT CONFIGURATION.
The message Printing... CONFIGURATION appears on the display until the printer finishes
printing the configuration page. The printer returns to the Ready state after printing the
configuration page.
Note If the printer is configured with EIO cards (for example, an HP Jetdirect print server) or an
optional hard disk drive, an additional configuration page will print that provides information
about those devices.
Supplies status page
The supplies status page illustrates the remaining life for the following printer supplies:
● print cartridges (all colors)
● transfer unit
● fuser
To print the supplies status page
1. Press M
ENU
to enter the MENUS.
2. Press to select INFORMATION.
3. Press to highlight PRINT SUPPLIES STATUS PAGE.
4. Press to select PRINT SUPPLIES STATUS PAGE.
The message Printing... SUPPLIES STATUS appears on the display until the printer
finishes printing the supplies status page. The printer returns to the Ready state after printing
the supplies status page.
Note If you are using non-HP supplies, the supplies status page might not show the remaining life
for those supplies. For more information, see
Non-hp print cartridges .
ENWW Printer information pages 89