HP 3500 - Manual (Page 125)

6. Align the print cartridge with the tracks inside the printer, and using the handle, insert the
print cartridge until it is firmly seated.
7. Firmly close the front door.
After a short time, the control panel should display Ready.
Note If a cartridge is in the wrong slot or the wrong type for the printer, the control panel will
display the message INCORRECT <COLOR> CARTRIDGE or INCORRECT SUPPLIES.
8. Installation is complete. Place the used print cartridge in the box in which the new
cartridge arrived. See the enclosed recycling guide for recycling instructions.
9. If you are using a non-HP print cartridge, check the printer control panel for further
instructions.
For additional help, go to http://www.hp.com/support/clj3500 for the HP Color LaserJet 3500
series printer or to http://www.hp.com/support/clj3700 for the HP Color LaserJet 3700 series
printer.
Replacing the transfer kit
Replace the transfer kit when the printer control panel displays a REPLACE TRANSFER KIT
message. The image transfer kit contains a replacement transfer unit for this printer.
ENWW Replacing supplies and parts 113